COMPLETE COURSE BSOP334 COMPLETE COURSE
Login
now
Register
now

Thursday, 5 November 2015

COMPLETE COURSE BSOP334 COMPLETE COURSE

BSOP 334 COMPLETE COURSE BSOP334 COMPLETE COURSE

Click below link for Answers

BSOP 334 Week 1 CheckPoint

1. (TCO 1) The Industrial Revolution began in which decade?
2. (TCO 1) Which of the following is NOT one of the three basic business strategies?
3. (TCO 1) Determine the multifactor productivity using the following data.
4. (TCO 1) Which of the following is a proper expression of productivity?

5. (TCO 1) Aggregate planners are concerned with
6. (TCO 1) The following are options when managing demand, EXCEPT


BSOP 334 Week 1 Lab Overview of Operations Planning & Control and Aggregate Planning

Note!
Submit your assignment to the Dropbox located on the silver tab at the top of this page.
(See the Syllabus section “Due Dates for Assignments & Exams” for due dates.)

Template and Tutorials

Please use the following Excel template and the tutorials below. They will help you work on the assignment listed at the bottom of this page.
Excel template:
·         Aggregate Planning Template
Click the links below to view the tutorials. Please be patient as it takes time to download each tutorial.
·         Using Templates (Time: 6 min, 46 sec)
·         Introducing Excel (Time: 9 min, 27 sec)
·         Aggregate Planning (Time: 12 min, 21 sec)
·         Transportation Model (Time: 5 min, 28 sec)

BSOP 334 Week 2 CheckPoint

1. (TCO 6) A concern of inventory management is
2. (TCO 6) Requirements for effective inventory management include all of the following, EXCEPT
3. (TCO 6) A basic issue of inventory ordering policy is
4. (TCO 3) Inputs to the master schedule include all of the following, EXCEPT
5. (TCO 3) The sequence of disaggregation is as follows:

BSOP 334 Week 2 Homework

·         Chapter 13: Discussion & Review Questions: 3, 6, 10, 11, & 14 (p. 601)
Please answer each assigned question completely, and be sure to spell-check before posting your assignment. Your assignment must be submitted as a MS Word document.
Submit your assignment to the Dropbox located on the silver tab at the top of this page. For instructions on how to use the Dropbox, read these step-by-step instructions or watch this Dropbox Tutorial.
See the Syllabus section “Due Dates for Assignments & Exams” for due date information.

BSOP 334 Week 2 Lab Determining Order Quantity for Lowest Total Cost

Note!

Template and Tutorials

Please use the following Excel template and the tutorials below. These will help you work on the assignment listed at the bottom of this page.
Excel template:
·         Inventory Management
Click the links below to view the tutorials. Please be patient as it takes time to download each tutorial.
·         Using Templates (Time: 6 min, 46 sec)
·         Introducing Excel (Time: 9 min, 27 sec)
·         Inventory (Time: 6 min, 31 sec)

Deliverables

Complete the following problems:
·         Chapter 13: Problems 3, 9, 10, 13, & 16 (pp. 602-604)
Submit your assignment to the Dropbox located on the silver tab at the top of this page.
See the Syllabus section “Due Dates for Assignments & Exams” for due date information.

BSOP 334 Week 3 CheckPoint

1. (TCO 2) How does dependant demand differ from independent demand?
2. (TCO 2) MRP
3. (TCO 2) The master production schedule
4. (TCO 2) The hierarchical nature of a BOM means that
5. (TCO 2) Low-level coding

BSOP 334 Week 3 Homework

Homework

·         Discussion and Review Questions: 1, 2, 3a, 3b, & 3c (p. 542), Case: Promotional Novelties (p. 549)
Please answer each assigned question completely, and be sure to spell-check before posting your assignment. Your assignment must be submitted as a MS Word document.
Submit your assignment to the Dropbox located on the silver tab at the top of this page. For instructions on how to use the Dropbox, read these step-by-step instructions or watch this Dropbox Tutorial

BSOP 334 Week 3 Lab Bill of Materials

Note!
Submit your assignment to the Dropbox located on the silver tab at the top of this page.
(See the Syllabus section “Due Dates for Assignments & Exams” for due dates.)

Template

Please use the components requirement sheet of the Excel template. It will help you work on the assignment listed at the bottom of this page.
Excel template:
·         MRP and ERP

Deliverables

Complete the following problems:
·         Chapter 12: Problems 1, 2, and 3 (pp. 543-544)
Submit your assignment to the Dropbox located on the silver tab at the top of this page.
See the Syllabus section “Due Dates for Assignments & Exams” for due date information.

BSOP 334 Week 4 CheckPoint

1. (TCO 8) Of the following order quantity methods, which does not attempt to balance ordering (or setup) and holding costs?
2. (TCO 8) All the following are inputs in an MRP system, except
3. (TCO 8) Of the MRP inputs, one of the following lists the assemblies, subassemblies, parts, and raw materials needed to produce one unit of a finished product. Which of the following is it?
4. (TCO 4) Of the MRP inputs, one of the following stores information on the status of each item by time period (e.g., on-hand, scheduled receipts, lead time, lot size). Which of the following is it?
5. (TCO 5) Under lot-for-lot ordering, planned order receipts are
6. (TCO 4) In MRP, the multiplication process used to determine lower level requirements is called

BSOP 334 Week 4 Homework

·         Chapter 12: Discussion and Review Questions: 8 & 13 (p. 542), Critical Thinking Exercise 1 (p. 543), Problem 14 (p. 547)
Submit your assignment to the Dropbox located on the silver tab at the top of this page. For instructions on how to use the Dropbox, read these step-by-step instructions or watch this Dropbox Tutorial.
See the Syllabus section “Due Dates for Assignments & Exams” for due date information.

BSOP 334 Week 4 Lab Material Requirements Planning and Dependant Demand

Note!
Submit your assignment to the Dropbox located on the silver tab at the top of this page.
(See the Syllabus section “Due Dates for Assignments & Exams” for due dates.)

Template

Please use the components requirement sheet of the Excel template. It will help you work on the assignment listed at the bottom of this page.
Excel template:
·         MRP and ERP

Deliverables

Complete the following problems:
·         Chapter 12: Problems 8, 10, 12, & 13 (pp. 545-547)
Submit your assignment to the Dropbox located on the silver tab at the top of this page.
See the Syllabus section “Due Dates for Assignments & Exams” for due date information.

BSOP 334 Week 5 CheckPoint

1. (TCO 9) The following feature of ERP makes it valuable as a strategic planning tool
2. (TCO 7) Which MRP approach is used for components or subassemblies to compensate for variations in lead time?
3. (TCO 5) Net requirements for Component J are as follows: 60 units in Week 2, 40 units in Week 3, and 60 units in Week 5. If a fixed-period, three-period lot-sizing method is used, what will be the quantity of the first planned receipt?
4. (TCO 9) Which statement concerning MRP II is false?
5. (TCO 7) Small changes in consumer demand can result in large variations in orders placed because of the _____.
6. (TCO 7) Effective supply chain management has all of the following benefits, except


BSOP 334 Week 5 Homework

Homework

·         Chapter 12: Discussion and Review Questions: 11, 14, 15, & 16 (p. 542)
·         Chapter 15: Discussion and Review Questions: 5, 9, & 11 (p. 695)
Submit your assignment to the Dropbox located on the silver tab at the top of this page. For instructions on how to use the Dropbox, read these step-by-step instructions or watch this Dropbox Tutorial.
See the Syllabus section “Due Dates for Assignments & Exams” for due date information

BSOP 334 Week 5 Lab MRP Complicating Factors and MRP-II, ERP, & Supply Chain Management

Note!
Submit your assignment to the Dropbox located on the silver tab at the top of this page.
(See the Syllabus section “Due Dates for Assignments & Exams” for due dates.)

Template

Please use the components requirement sheet of the Excel template. It will help you work on the assignment listed at the bottom of this page.
Excel template:
·         MRP and ERP

Deliverables

Complete the following problems:
·         Chapter 12: Problems 5, 6, & 7 (pp. 544-545)
Submit your assignment to the Dropbox located on the silver tab at the top of this page.
See the Syllabus section “Due Dates for Assignments & Exams” for due date information.

BSOP 334 Week 6 Homework

Homework

·         Chapter 5: Discussion and Review Questions: 1, 2, 6, 11, & 15 (p. 208), Problem 13 (p. 210)
Submit your assignment to the Dropbox located on the silver tab at the top of this page. For instructions on how to use the Dropbox, read these step-by-step instructions or watch this Dropbox Tutorial.
See the Syllabus section “Due Dates for Assignments & Exams” for due date information.

BSOP 334 Week 6 Lab Strategic Capacity Planning and CRP Logic

Note!
Submit your assignment to the Dropbox located on the silver tab at the top of this page.
(See the Syllabus section “Due Dates for Assignments & Exams” for due dates.)

Template

Please use the components requirement sheet of the Excel template. It will help you work on the assignment listed at the bottom of this page.
Excel template:
·         Strategic Capacity Planning for Products and Services (for Chapter 5 problems)
·         MRP and ERP (for Chapter 12 problems)

Deliverables

Complete the following problems:
·         Chapter 5: Problems 1 & 3 (pp. 208-209)
·         Chapter 12: Problems 15 & 16 (pp. 547-548)
Submit your assignment to the Dropbox located on the silver tab at the top of this page.
See the Syllabus section “Due Dates for Assignments & Exams” for due date information.

BSOP 334 Week 7 CheckPoint

1. (TCO 10) The ultimate goal of lean operations is to have
2. (TCO 10) Which of the following does not contribute to reduced setup time and cost?
3. (TCO 10) A basic requirement for operating with the low inventories present in lean systems is
4. (TCO 15) Organizations with fixed, perishable capacity can benefit from _____.
5. (TCO 15) The matrix below shows relative costs for various job-machine combinations. Which set of pairs constitutes the minimum cost solution using the assignment method?
6. (TCO 16) Input/output (I/O) control refers to

BSOP 334 Week 7 Homework

Homework

·         Chapter 14: Discussion and Review Questions: 2, 3, 4, 5, & 8 (pp. 650-651)
·         Chapter 16: Discussion and Review Questions: 1, 5, 7, & 8 (p. 732)
Submit your assignment to the Dropbox located on the silver tab at the top of this page. For instructions on how to use the Dropbox, read these step-by-step instructions or watch this Dropbox Tutorial.
See the Syllabus section “Due Dates for Assignments & Exams” for due date information.

BSOP 334 Week 8 Final Exam

1. (TCO 1) Which of the following functions involves budgeting, analysis of investment proposals, and provision of funds? (Points : 5)
Operation
Marketing
Purchasing
Finance
Internal audit

Question 2. 2. (TCO 1) Transformation includes all of the following, except (Points : 5)
assembling.
teaching.
staffing.
farming.
consulting.

Question 3. 3. (TCO 1) Which of the following is providing new opportunities for productivity improvements? (Points : 5)
Pollution control
Total quality management
Supply chain management
Competition from foreign manufacturers
Technological change

Question 4. 4. (TCOs 3 & 6) In an effort to reduce inventory, which of the following interactions with vendors would potentially be helpful? (Points : 5)
Reducing lead times
Increasing safety stock
Less frequent purchases
Larger batch quantities
Longer order intervals

Question 5. 5. (TCOs 3 & 6) Which of the following costs related to order size is nonlinear? (Points : 5)
Interest
Insurance
Taxes
Receiving
Space

Question 6. 6. (TCO 2) Which of the following is a computer-based information system designed to handle ordering and scheduling of dependent-demand inventories? (Points : 5)

Question 7. 7. (TCO 2) Net material requirements can be described as (Points : 5)

Question 8. 8. (TCO 2) When an MRP system is periodically updated to account for all changes that have occurred within a given time interval, the process is called (Points : 5)

Question 9. 9. (TCOs 4, 5, & 6) How does a net-change system work? (Points : 5)

Question 10. 10. (TCOs 4, 5, & 6) The MRP approach that is used for components or subassemblies to compensate for variations in lead times is called (Points : 5)

Question 11. 11. (TCOs 4, 5, & 6) A lead time service level of 90 percent implies which of the following? (Points : 5)

Question 12. 12. (TCOs 5, 7, & 9) The dynamic store of information on the status of each item by time period (e.g., scheduled receipts, lead time, lot size), which is an input to the MRP, is the (Points : 5)

Question 13. 13. (TCOs 5, 7, & 9) What will be the quantity of the first planned receipt if net requirements for component J are as follows: 60 units in Week 2, 40 units in Week 3, and 60 units in Week 5? A fixed-period, two-period lot-sizing method is used. (Points : 5)

Question 14. 14. (TCO 11, 12, 13, & 14) Given a product mix, scheduling difficulties, quality factors, and so on, the maximum expected output is (Points : 5)

Question 15. 15. (TCOs 11, 12, 13, & 14) Given the following information, calculate the efficiency.

Effective capacity = 50 units per day

Design capacity = 100 units per day

Actual output = 30 units per day (Points : 5)

Question 16. 16. (TCOs 10, 15, & 16) In an assignment method problem, it takes Abe 3 hours to build a birdhouse and 4 hours for a doghouse, while Betty takes 4 hours for a birdhouse and 3 hours for a doghouse. What is the reduced cost (in hours) of assigning Abe to build the doghouse? (Points : 5)

Question 17. 17. (TCOs 10, 15, & 16) The matrix below shows relative costs for various job-machine combinations. Which set of pairs constitutes the minimum cost solution using the assignment method?
Machine
A
B
C
Job 1
$6
0
0
2
0
3
4
3
0
1
2
(Points : 5)
1. (TCO 1) A company has found that introducing one additional worker enables a process improvement that reduces processing time for each unit so that output is increased by 25% with less material. Under the old process, five workers could produce 60 units per hour. Labor costs are $12/hour, and material input was previously $16/unit. For the new process, material is now $10/unit. Overhead is charged at 1.6 times direct labor cost. Finished units sell for $31 each. What increase in productivity is associated with the process improvement? (Points : 30)
2. (TCOs 3 & 6) If instantaneous replenishment is assumed when given the same demand, setup/ordering costs, and carrying costs, then the EOQ calculated using incremental replenishment will be _____.

Illustrate using a numeric example. (Points : 30)
What is the optimal production size?
3. (TCO 2) For the product tree below, how many Cs are needed if 17 Ps are needed and on-hand inventory consists of 10 As, 15 Bs, 20 Cs, 12 Ms, and 5 Ns? Show your work.



(Points : 30)
4. (TCOs 4, 5, & 6) Given the tree below, develop a material requirements plan for end-item P and its components. Assume that all lead times are one week and that lot-for-lot ordering is used, except for Item F, which is ordered in multiples of 400 units.
6. (TCOs 11, 12, 13, & 14) A small business owner is contemplating the addition of another product line. Capacity increases, and equipment will result in an increase in annual fixed costs of $50,000. Variable costs will be $25 per unit. What unit selling price must the owner obtain to break even on a volume of 2,500 units a year?



B) Because of market conditions, the owner feels a revenue of $47 is preferred to the value determined in part A. What volume of output will be required to achieve a profit of $16,000 using this revenue?(Points : 30)
5. (TCOs 5, 7, & 9) Explain the advantages and disadvantages of frequent deliveries of small shipments.(Points : 25)
7. (TCOs 10, 15,& 16) Compare and contrast kanban and CONWIP. (Points : 20)
8. (TCOs 8 & 9) MPS planners use what is referred to as time fences? What are they, and why are they used? (Points : 20)

BSOP 334 All Weeks Discussions

Week 1 DQ 1 - Production Scheduling
Week 1 DQ 2 - Aggregate Planning
Week 2 DQ 1 - Inventory
Week 2 DQ 2 - Order Timing
Week 3 DQ 1 - MRP Process
Week 3 DQ 2 - Bill of Materials
Week 4 DQ 1 - Material Requirements Planning
Week 4 DQ 2 - MRP Dynamics
Week 5 DQ 1 - MRP II & ERP
Week 5 DQ 2 - Supply Chain Management
Week 6 DQ 1 - Rough-Cut Capacity Planning
Week 6 DQ 2 - CRP
Week 7 DQ 1 - Lean Systems
Week 7 DQ 2 - Global Competitiveness in Operations

BSOP 334 All ilabs

BSOP 334 Week 1 Lab Overview of Operations Planning & Control and Aggregate Planning
BSOP 334 Week 2 Lab Determining Order Quantity for Lowest Total Cost
BSOP 334 Week 3 Lab Bill of Materials
BSOP 334 Week 4 Lab Material Requirements Planning and Dependant Demand
BSOP 334 Week 5 Lab MRP Complicating Factors and MRP-II, ERP, & Supply Chain Management
BSOP 334 Week 6 Lab Strategic Capacity Planning and CRP Logic

BSOP 334 Entire Course / Devry University / Graded A

BSOP 334 Week 1 CheckPoint
BSOP 334 Week 1 DQs
BSOP 334 Week 1 Lab Overview of Operations Planning & Control and Aggregate Planning
BSOP 334 Week 2 CheckPoint
BSOP 334 Week 2 DQs
BSOP 334 Week 2 Homework
BSOP 334 Week 2 Lab Determining Order Quantity for Lowest Total Cost
BSOP 334 Week 3 CheckPoint
BSOP 334 Week 3 DQs
BSOP 334 Week 3 Homework
BSOP 334 Week 3 Lab Bill of Materials
BSOP 334 Week 4 CheckPoint
BSOP 334 Week 4 DQs
BSOP 334 Week 4 Homework
BSOP 334 Week 4 Lab Material Requirements Planning and Dependant Demand
BSOP 334 Week 5 CheckPoint
BSOP 334 Week 5 DQs
BSOP 334 Week 5 Homework
BSOP 334 Week 5 Lab MRP Complicating Factors and MRP-II, ERP, & Supply Chain Management
BSOP 334 Week 6 DQs
BSOP 334 Week 6 Homework
BSOP 334 Week 6 Lab Strategic Capacity Planning and CRP Logic
BSOP 334 Week 7 CheckPoint
BSOP 334 Week 7 DQs
BSOP 334 Week 7 Homework

BSOP 334 COMPLETE COURSE BSOP334 COMPLETE COURSE

Click below link for Answers


 
© Copyright 2015 Work Bank Theme by Workbank